Some advise of use

Madam, Sir, You have just acquired a purifying apparatus of air OR' IONS equipped with the exclusive device of aeroionisation high density: electronic Optics with "surconfinement of plasma", without emission of the most powerful ozone, currently on the market.

So that you can obtain your apparatus the maximum of satisfaction and comfort, we advise you to follow the following instructions:

1 POSITIONING

if possible, hold the ionisor far away from the walls, the bulky metal objects, the curtains and hangings

Do not place it on the floor.

Position it in an environment easy to clean, a normal deposit of particles being able to occur around the apparatus. ( This deposit proves that the apparatus functions and that your atmosphere was not so clean that you think before ...) This is the reason why it's better to place it at at least 10 to 15 cm of a wall or ceiling.

2 MAINTENANCE

External surfaces of the case being treated especially, you should never use detergents or solvents whatever they are.

3 CLEANING

Use the soft brush of the vacuum cleaner to vacuum-clean the faces carrying the transmitting points, and a nonfluffy soft rag for the others faces. This cleaning is to be made regularly. Do not hesitate to clean around the ionisor: the deposit will then be eliminated progressively .

4 RECOMMENDATIONS

No product, no liquid, no powder must be introduced into the openings of ionic emission.

5 USE

- Connect the power cord (tension of use: 220 volts).

- Switch M/A orders the starting or the stopping of the apparatus. The red indicator ignites when the apparatus is under tension.

the TP 95, LB 180 models are equipped with a tester carrying out a permanent control of the flow of negative ions. The lit green indicator is the witness of the correct operation of the apparatus.

This witness is a genuine reception antenna . As you will notice it this witness dies out when you approach the apparatus, that you touch it, or sometimes during a few moments (for example if you send a cloud of smoke to him). This is normal and does not want to say that the apparatus does not function, but simply that the ions are absorbed by the volume which you represent or by the leakage current which you create in concerning. It is the same when the apparatus is in position 1 or 2 (small speed and average).

Only an indicator extinguished during several minutes in position 3 wants to say that the emission is stopped.

Apparatuses TP 95, LB 180 are provided with a switch with three positions, allowing the adjustment of the power of the flow of negative ions:

1 = power minimum

2 = average power

3 = maximum capacity.

An advise : if possible always leave your apparatus on the maximum position (Too many ions never harm health)

Then why several speeds.

The explanation by an image an ionized place is as a place in altitude (as for the ionic density) In position 3 ionisor OR' IONS transports you to 2000 m of altitude (like in a little town name St Veran in the Alpes) in position 2 you are not more that to 1500 m and in position 1 with 1000m Or it is that certain people do not sleep well since they are in altitude. It is for that that speeds were added. (a medical explanation exists).

Thus always at the maximum (3); if at the end of 8 days you have the impression less better to sleep (it is rare) you test to 2 then to 1 and during the day let it at the maximum speed (3).

6 INFORMATION

Do not hesitate to put your questions by our email